DOWELL INDUSTRY GROUP LIMITED
Model No.: DW-8062
Place of Origin: CHINA
Supply Ability: 1000000PCS
HS Code: 85177090
LAN & USB Multi-Modular Cable Tester. The LAN/USB Cable Tester is designed to easily read the correct cable pinout configuration.The cables include of USB(A/A), USB(A/B), BNC,10Base-T,100Base-Tx,1000Base-TX, Token Ring, AT&T 258A, Coaxial, EIA / TIA568A / 568B and RJ11 / RJ12 modular cables.
You can use connect cable if you want to test BNC, Coaxial, RCA modular cables.
If you want to test cable installed far away either on the Patch Panel or wall plate which can use the Remote terminator.
The LAN/USB Cable Tester tests RJ11/RJ12 cable, please use the appropriate adaptors RJ45, and follow the above procedure. So you can use it very easy and correct.
1.Using the master tester, plug one end of the tested cable(RJ45/USB) to the marked with "TX" and another end of the tested cable to the marked with "RX" or Remote terminator RJ45 / USB connector.
2.Turn the power switch to "TEST". In the step by step mode, the LED for pin 1 with light up, with each press of the "TEST" button, the LED will scroll in sequence, in the "AUTO" scan mode. the upper row of LEDs will begin to scroll in sequence from pin 1 to pin 8 and ground.
3.Reading the result of the LED display. It tells you the correct status of the tested cable. If you read out the incorrect of LED display, the tested cable with the short, open, reversed, miswired and crossed.
Note: If the Battery Low power, the LEDs will be dimmed or no light and the test result will be incorrect. (Does not include battery)
1.Using the master tester, plug one end of the tested cable to the marked with "TX" jack and another end on the receiving of the remote terminator, turn the power switch to auto mode and use the adapter cable if the cable terminates into a patch panel or wall plate.
2.The LED on the remote terminator will begin to scroll in relation to the master tester indicating the cable's pinout.
Warning: Please don't use in live circuits.
Q: Are you trading company or manufacturer?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra?
A: Yes, we could offer the sample for the free charge but do not pay the cost of freight.
Q: What are your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
Copyright © 2020 DOWELL INDUSTRY GROUP LIMITED All rights reserved.